Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter screens and printers. You will have your device within easy reach, safe and convenient! The installation is quick and easy and will not damage the interior. Detailed installation instructions included.
Attention! Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Press the thin end of the enclosed gap opener into the gap between the control panel and the surrounding frame, to widen the gap. Peel off the adhesive tape covers on the ProClip. Press the curved edge on the left end of the ProClip into the gap below the gap opener. Press the ProClip forwards and flip it to the right so the curved edge hooks behind the control panel. Pull out the gap opener.
2. Press the gap opener into the gap between the panel and the dashboard. Hook the lower part of the ProClip under the edge of the panel, into the gap next to the gap opener. Pull out the gap opener.
3. Press the upper part of the ProClip downwards, into the gap between the cup holder and the dashboard. Open the cup holder. Remove the screw (the one to the left) in the cup holder. Place the upper part of the ProClip so the hole matches the hold in the cup holder. Screw the screw back into place. Close the cup holder.
4. The ProClip is in place.
Also Suitable for:
Shop safely and securely
