Extra-strength ProClip for Volvo FH series 09-12 (LHD)

Please read all instructions and look at the pictures before attaching the ProClip. This ProClip consists of two parts.
Part 1. The smallest part
Part 2. The large part with mounting plate

1. Remove the rubber cover in the coin compartment. Hold Part 1 so the holes are facing toward you and the two studs are on pointing downward. Place Part 1 in the holes in the coin compartment and pull it toward you so the studs are locked into place in the holes. Press the angled edge on the upper part of Part 2 into the gap in the dashboard.

2. Flip Part 2 downward and press the lower part forward so the angled upper edge hooks into the gap. Make sure that the holes in Part 2 match the holes in Part 1, adjust the position sideways if neccessary.

3. Attach Part 1 onto Part 1 with the enclosed screws. Press Part 1 toward Part 2 and in the same time tighten the screws until Part 1 is touching Part 2.

4. The ProClip is in place.