Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter screens and printers. You will have your device within easy reach, safe and convenient! The installation is quick and easy and will not damage the interior. Detailed installation instructions included.
Please read all of the instructions and look at the pictures before installing the mount.
This mount can also be placed further right, then insert the upper edge of the mount to the right of the divider in the airvent on top of the dashboard.
1. Carefully, pull the parts of the mount apart until the mount reaches maximum length. Insert the thin end of the enclosed gap opener into the front gap of the airvent, on top of the dashboard, to widen the gap. Insert the angled upper edge of the ProClip into the gap next to the gap opener. Remove the gap opener.
2 Hook the angled lower edge of the ProClip around the dashboard ledge. Press the parts of the mount together until the mount reaches minimum length and hooks into place properly.
3. Tighten the nut on the top of the mount so the parts are pulled together so the mount is firmly in place. Tighten the Allen screw with the enclosed key in order to fixate the position.
4. The mount is in place.
Also Suitable for:
Shop safely and securely
