The ProClip is a mounting bracket that you attach onto the vehicle’s dashboard. It provides a mounting platform for mobile phones and other devices that you want to have within easy sight and reach in the car. Safe, neat and convenient! The ProClip has a perfect fit, it is custom made for each vehicle to ensure a secure base for installations.
The ProClip is easy to install. The bracket simply snaps into place in gaps in the dashboard, you do not need to drill holes, not use special tools or not dismantle the dashboard. Made in black ABS plastic. Comes with detailed installation instructions. The mounting plate is equipped with predrilled holes which make the installation of equipment on the ProClip easier. The holes suit all Brodit holders and other products with standard holes, the hole pattern constists of one set of AMPS-holes as well as two sets of double-holes placed in different height.
Please read the instructions and look at the pictures before installing the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Insert the thin end of the enclosed gap opener into the gap between the right vent frame and the inner part of the vent, to widen the gap. It will help to start at the lower right corner. Once the gap opener is inserted, slide the gap opener up to the top of the right side of the vent. Be sure to keep the gap opener into the seam.
2. Remove the adhesive tape cover on the ProClip. Starting with a corner, insert the angled left side of the ProClip into the gap between the frame surrounding the left side of the air vent and the inner part of the vent. Slide the ProClip slightly up and down until you feel where the full length of the edge can go into the gap.
3. Press the right side of the ProClip leftward, flexing the ProClip, and insert the right angled edge of the ProClip into the gap below the gap opener. Remove the gap opener.
4. The ProClip is in place.
Also Suitable for:
Shop safely and securely
