Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter screens and printers. You will have your device within easy reach, safe and convenient! The installation is quick and easy and will not damage the interior. Detailed installation instructions included.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Press the thin end of the enclosed gap openers into the seam above the air vent between the vent frame and the padded upper part of the dash, to widen the gap. Peel off the adhesive tape cover on the ProClip.
2. Press the angled edge on the lower part of the ProClip into the gap between the gap openers.
3. With one hand, press forward on the faceplate of the ProClip (keeping the lower angled edge into the seam). With yout other hand, press downward on the forward most hooked ede of the ProClip. Flex the ProClip forward and downward. Hook the forward edge of the ProClip over the panel in the vent area. Pull out the gap openers.
This is a very tightly fitting mount and will take some pressure to attach or hook the ProClip onto the seam in the front vent.
4. The ProClip is in place.
Also Suitable for:
Shop safely and securely
