ONLY for models with navigation screen.
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the adhesive tape cover on the ProClip. Press the angled edge on the upper part of the ProClip into the seam between the dashboard ledge and the thin panel below the navigation screen panel. Then flip the ProClip downward so the lower angled edge on the ProClip hooks behind the panel.
2. Push upward on the bottom part of the ProClip so it flexes upward. Let the ProClip rest on top of the air vent panel.
3. Press the thin end of the enclosed L shaped gap opener into the gap between the center console and the air vent panel next to the ProClip, to widen the gap. Then press firmly forward on the lower part of the ProClip so the angled edge goes into the gap next to the gap opener. Note: If the gap is tight pull the panel slightly towards you using the gap opener while pushing forward on the ProClip. Push until you see or hear/feel it click into place. Pull out the gap opener.
4. The ProClip is in place.
Also Suitable for:
Shop safely and securely
