skip to main content
£0.00
0
Passive holder with tilt swivel for Crosscall Core-T5
Passive holder with tilt swivel for Crosscall Core-T5
Passive holder with tilt swivel for Crosscall Core-T5
Passive holder with tilt swivel for Crosscall Core-T5
Passive holder with tilt swivel for Crosscall Core-T5
 Passive holder with tilt swivel for Crosscall Core-T5
Passive holder with tilt swivel for Crosscall Core-T5
Passive holder with tilt swivel for Crosscall Core-T5
Passive holder with tilt swivel for Crosscall Core-T5
Passive holder with tilt swivel for Crosscall Core-T5

Passive holder with tilt swivel for Crosscall Core-T5

Can be used with Crosscall X-Cable USB A- X-Link.

Brodit special order product, please contact us for details

Product Code: 716353

Special order item, lead time from manufacturer is 7-10 working days.

With your tablet in a holder attached in your car you will always have it within easy reach in the car. Safe, neat and convenient! You can connect e.g. a charging cable to the device when it is in the holder. The holder Can be used with Crosscall X-Cable USB A- X-Link. Cable not included.

The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden.
 
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.

Please read all of the instructions and  look at the pictures before attaching the holder.
 
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.
 
2. To place the device in the holder: Place the lower part of the device in the holder, then flip/press the upper part forwards so it snaps into place in the holder. To remove the device from the holder: Press upwards on the upper part of the holder, in the same time pull the upper part of the device out from the holder and then lift the device up and out from the holder.
 
3. To mount the cable: Loosen the screws on the back plate. Press the charging cable into the slot on the plate as shown, place the magnetic charger itself in the center of the slot. Place the backing plate on the back of the holder so that it fits against the pre-drilled holes. Screw the parts together.
 
4. The holder is in place.

Passive holder with tilt swivel for Crosscall Core-T5 Passive holder with tilt swivel for Crosscall Core-T5 Passive holder with tilt swivel for Crosscall Core-T5 Passive holder with tilt swivel for Crosscall Core-T5

Also Suitable for:

Item added to basket

FANCY A 15% PROMO CODE?

Get the latest news and offers by subscribing to Brodit UK. By submitting your details, you acknowledge your data will be used in line with our privacy policy. Unsubscribe at anytime.