Fits device with Zebra Original Rugged Boot and original cable (CBL-TC51-USB1-01) (Cable not included) 3-point holder for a more secure hold.
Keep your device in a holder and you always have it within easy sight and reach! The holder is mounted on a tilt swivel so you can easily adjust the angle of the device in order to avoid light reflection. 3-point holder for a more secure hold.
Fits device with Zebra Original Rugged Boot and Zebra Original Cable (item no: CBL-TC51-USB1-01) (Cable not included).
Mounting plate 42x50 mm with pre-drilled AMPS hole. Made of black ABS/Acetal plastic. Attach onto a Pedestal Mount or an extra strength ProClip mounting platform. Made in Sweden.
Please read all of the instructions and look at the pictures before attaching the holder.
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw so the holder is firmly in place, but still can be adjusted.
3. To place the device in the holder: Place the bottom part of the device into the holder. Press the top of the device forward and in the same time slide the device downward into place in the holder. To remove the device from the holder: Press the upper part of the holder forward. When the device is set free, lift it upward out of the holder.
4. The holder is in place.
Also Suitable for:
Shop safely and securely
