With cig-plug adapter. With swiveling top. With tilt swivel.
Robust active holder with rugged design to withstand rough handling in professional everyday use. Keeps your device extra securely in place in the holder. Thanks to the swiveling top part which ”locks” the device in the holder, the charging is properly connected at all times and the device can not shake the least. Custom made with a perfect fit.
With USB cable with cig-plug adapter. The holder is equipped with a tilt swivel so you can easily adjust the angle for good viewing. Tilts 15°, swivels 360°. Attach onto a Pedestal Mount or High Strength ProClip Mounting Platform. Made of black Acetal/ABS plastic. Made in Sweden
Dimensions: 93 x 198 x 79 mm (W x H x D mm)
Weight: 344 g
Cable length: 110 cm
This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).
Please read all of the instructions and look at the pictures before attaching the holder.
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel and screw it into place. Tighten the screw firm at first, then loosen it a bit so the holder is firmly in place, but still can be adjusted.
2. To place the device in the holder: Place the device over the holder and slide it downward into the holder so the charging connector connects. Turn the swiveling top sideways so it is placed over the device and hold it extra securely in place.
3. To remove the device from the holder: Turn the swiveling top sideways away from the device so the device is set free. Lift the device upward out from the holder.
4. The holder is in place.
Also Suitable for:
Shop safely and securely
